Wrap Up Of A Week Each with Unity and Gnome 3

Somehow I knew that when I wrote my last post about working for a week each with Unity and Gnome 3, that this post would not necessarily come two weeks after. Daily activities and the Stanley Cup finals sort of sidetracked me (well worth it though  – Woooooo! Bruins! Congratulations!)

The good part is I did take down some notes so that I would hopefully not forget any point I wanted to make, one bad thing is that I forgot to get screenshots. That said, I did not change the default interfaces other than the background image, so if you are familiar with either interface, or have screenshots, those default setups are what I worked with. I’ll also mention here that my side experiment I mentioned in the previous post of running Windows as a VM were mixed under both environments, but I think this was due to subpar video on the laptop I was using.

My goal was not to do a full technical review, but to look at each of these interfaces from a usability perspective. Not to get ahead of myself, but it does seem clear to me that both of these interfaces are meant for newer folks to Linux, or not as technically oriented people who just want to use a computer. I did try to keep this in mind as I worked with these environments, but I found it tough at times since I am a more than average technical user. Hopefully I don’t come across as unfair at all. Also, as mentioned in my previous post, my other concern is the higher hardware requirements needed – neither one would run as a VM.

Unity (Ubuntu 11.04 Default Interface)

When you first enter Unity, the first thing you notice is the launcher bar on the left side of the screen. This wasn’t really foreign for me, since I’ve actually been experimenting with the taskbar on the left side of the screen in Windows for about three months now. There is also one master menu in the upper left (as opposed to the gnome 2.x default 3 menu bar). The launcher bar is fixed in size, which could take up a large amount of real estate on some smaller resolution screens. I did install a package that allows you to change the launch bar size – compizconfig-settings-manager. When you click on the menu, it brings up what I found to be a bit too simplistic grid of large icons for apps. If you don’t see the app you want, and know that it is installed, the fastest way to get to it is to type the name, and hope you have it correct so it finds it. Otherwise, you’re typically left with quite a few mouse clicks to get to where you need. Once you find it, you can add to the launcher for quicker access. This grid of icons, along with the square icon look of the launcher, seem to lend itself to a mobile OS rather than a desktop OS. I found it interesting that as I was doing some things under Unity, my 6 year old came up to me and asked if the laptop screen was a touchscreen.

A while back, Microsoft tried to cram a desktop OS into a mobile platform (Windows CE, and Mobile 6.x and before – I don’t have any experience with Windows Phone 7 OS). This didn’t work great then, and I’m not sure it works great going the other way – taking elements of mobile OS’s and bringing them to the desktop to the point where it resembles a mobile OS. I expect one experience from a desktop OS, and another from a mobile OS. Or maybe I’m just a bit too old school and haven’t warmed up to the idea, yet… time will tell.

Some minor things I noticed in Unity:

  • To re-position an app in the launcher, you need to drag it out of the launcher bar, then back into it in it’s desired location.
  • The previous mentioned need to install a package to adjust the size of the launcher bar.
  • Some inconsistencies with how apps are maximized – some maximize so their close button, etc are in the title bar of the OS, others remain in the title bar of the app.
  • When I did launch apps via VMWare Unity (not the same as Ubuntu Unity), it did not create an icon in the launcher for that app, where it does create an entry in the taskbar of Gnome 2.x.

Gnome 3 (Default Interface in Fedora 15)

The first thing I ran into with Fedora 15 is that wireless network did not work. But since this isn’t a technical review of the particular distro, I simply did not put in much effort to fix it. I plugged in my ethernet cable, and moved on.

My first thoughts about Gnome 3 were “same, yet different” when compared to Unity. Because of this, this section may be a bit shorter than the Unity section, mostly because it will be comparison.

There is still the menu at the top left, call Activities. The difference here is that the launcher, also on the left side, does not appear until you click on Activities or activate a hotspot corner. This is a bit of a minus in my book. When you click on the Activities menu, you are presented with a similar set of large grid icons for apps, where if you don’t see the app you want, you are now in the situation of typing the name, or on a too many mouse click trail to get to the app. Again, here, perhaps a little too “mobile OS like”.

The other things I noted in Gnome 3:

  • The same app re-position issue as in Unity, you have to move the app outside the area to then move it back in to desired postion.
  • I am not sure if this is a Gnome or Fedora issue, but to shut down the machine, it appears like you need to log off first. Shut Down does not appear to be an option under the user action menu that is in the upper right.

Final Thoughts

I probably sound like I’m coming down a bit hard on each. I do think they are fine environments for the non-technical user who wants to check their web based email, do general web browsing, occasional access to office apps (using Libre Office), etc. That said, I can’t help but think there were really designed for mobile (especially tablet) platforms, and are being forced on the desktop. Most folks that think of using Linux tend to be more technically savvy, and therefore, I think, expect a different, and more robust, experience from their desktop than with a mobile platform. Ubuntu does offer to change your selection to Ubuntu Classic, which is Gnome 2.x. I am not aware of a similar function in Gnome 3, but if you didn’t have the hardware to run Gnome 3 default, then it will revert to an interface similar to Gnome 2.x.

I do tend to try and have an open mind about changes like these – at least developers are trying to innovate. So perhaps these environments will grow on me over time… or not.

But what say you? Let’s do a “Science Attic” first and do a poll! Please leave comments too, if you’d like, especially if the poll misses your point of view!

Advertisements

A Week Each With Unity (Ubuntu 11.04) & Gnome 3 (Fedora 15)

There are some interesting changes that Ubuntu‘s new Unity interface, and Gnome’s new version 3 bring to the table. I say “interesting” because if you look around the internet enough, you’ll find quite a mix of opinions on both.

Of course I’m interested in what all the discussion is about. I’ve decided to commit to working with each for one week so see what thoughts I come away with. The reason for a week is I don’t want to come up with impressions after working only a few hours with any particular environment, then hastily come to conclusions based on those impressions.

To level set what my Linux background is, and where I’m coming from is that I’ve played with plenty of Linux distros, usually ones based on Gnome 2.x, and therefore primarily what I am used to. I would not label myself as any sort of Linux expert, but do consider myself reasonably proficient. Most of my knowledge of Linux was self taught until recently when I took a one week class in Linux Fundamentals in February, and another one week course in Linux Administration a few weeks ago. The product I support is a Storage Virtualization solution, in which the management server and the directors run Linux instances. So most of what I do in Linux for work is in the CLI.

Side note regarding the Linux Administration class. This was a remote class I took from home, which resulted in a proud “geek dad” moment for me. My 6 year old son saw me taking the class, and was intrigued. He then insisted that I sit with him, so I could teach him “just like in Linux class” – and he was all about the CLI, since that was what class focused on. (Sorry, had to get this in there!)

So back to Unity and Gnome 3. I downloaded the iso’s for both Ubuntu 11.04 and Fedora 15 and fired up VMWare Workstation. Installed each and… ugh. The main features for both Unity and Gnome 3 will not run as a VM (at least on my systems). So it looks like my first point of concern is the hardware requirements to run these environments the way they are intended. It appears as though you will need to run these on the bare metal.

Luckily, I have a laptop that I did not have much data on, so it was pretty painless to wipe it and install these. Since last night I have Ubuntu 11.04 running Unity installed, from which I am writing this post. Next week I will wipe it and install Fedora 15. The test system in question is a Toshiba Satellite L505D-ES5025 (2.3 GHz AMD Turion II M520, 4GB RAM, 320GB HDD) that I have had just over a year.

One other experiment I am doing since I will be running Linux on the hardware itself vs. a VM: I will be installing VMWare Player and will see what sort of experience I have with running Windows 7 as a VM.

So let’s see how this goes…